2. Applications Across Industries: How Versatile Are These Precision Presses?
3. The Competitive Edge: What Sets FHD-Longmen Tyoehigh Apart?
1. Increased Production EfficiencyThe FHD-300 T 100HP Precision Press significantly enhances production efficiency by optimizing both speed and precision. Traditional presses often suffer from slower ...
READ MORE1. Reduced Vibrations for Consistent PerformanceVibrations in punching machines can lead to uneven pressure during each punch cycle, significantly increasing the rate of tool wear. Inconsistent vibrat...
READ MORE1. Exceptional Precision and AccuracyPrecision is a critical factor for any production process, especially when high-quality standards must be maintained. The FHD-60 T 25HP Precision Press is built to...
READ MORE1. High-rigidity structural designHigh-rigidity structural design is the basis for ensuring that High Precision Compact Power Press FCP can achieve high-precision processing. During the processing, th...
READ MOREUsing a 4 or 6-round pillar structure can decrease dynamic friction. therefore, in the case of continuous operation for a long time, the heat generation is very tiny to ensure the accuracy of the press and to prevent damage to the mold, extending the life of the mold.
Longmen Tyoehigh Precisionpresses Guides Product Description
【Cast body and excellent mechanism design】
Three-stage casting body with high rigidity, so it is with small deformation and can absorb shock. Good structure design can control the low die point accuracy to 0.005mm.
【Eccentric point design】
With a particular design, our eccentric strength is far greater than the average crankshaft design with deformation capability in large output and high accuracy.
【Dynamic balance device】
The upper die dynamic balance device can offset the vibration of the reciprocating motion to ensure working accuracy.
【Separated clutch and brake】
Adopts a separated clutch and brake design, the braking time is short, with a small angle; and the load at both ends of the crankshaft is average, which can reduce the bearing wear, to maintain good accuracy.
【Saw tooth hydraulic locking system】
The saw tooth hydraulic locking device is using high pressure to eliminate the gao of the sawtooth, ensuring movement precision.
【Forced lubrication system】
Forced lubrication system, lubricating oil is driven by a powerful motor to lubricate all the components of the machine to prevent wear and reduce heat, extend machine life.
Size Information
Model |
A |
B |
C |
D |
E |
F |
G |
H |
I |
FHD-30 |
2395 |
1065 |
350 |
500 |
1420 |
1050 |
200 |
865 |
1200 |
FHD-45 |
2398 |
1250 |
435 |
620 |
1510 |
1510 |
235 |
1005 |
1490 |
FHD-60 |
3150 |
1230 |
280 |
655 |
2200 |
1450 |
380 |
910 |
1800 |
FHD-80 |
3700 |
1430 |
365 |
1150 |
2050 |
1800 |
370 |
1080 |
1880 |
FHD-125 |
3790 |
1420 |
495 |
1250 |
2680 |
2000 |
400 |
1100 |
2240 |
FLD-220 |
4350 |
1465 |
660 |
1830 |
3770 |
1940 |
450 |
1095 |
3150 |
FHD-220 |
4350 |
1515 |
660 |
1580 |
3520 |
1940 |
450 |
1095 |
2900 |
FHD-300 |
4700 |
1560 |
860 |
1780 |
4060 |
2180 |
500 |
1105 |
3500 |
Model |
A |
B |
C |
G |
N |
P |
Q |
R |
T |
W |
X |
Y |
Z |
FHD-30 |
330 |
450 |
630 |
90 |
245 |
660 |
460 |
500 |
100 |
32 |
32 |
20 |
18 |
FHD-45 |
380 |
540 |
720 |
90 |
300 |
750 |
500 |
500 |
100 |
40 |
40 |
25 |
22 |
FHD-60 |
450 |
600 |
950 |
150 |
300 |
950 |
700 |
600 |
130 |
40 |
40 |
25 |
22 |
FHD-80 |
500 |
900 |
500 |
150 |
330 |
1200 |
750 |
750 |
150 |
50 |
50 |
28 |
28 |
FHD-125 |
600 |
900 |
1500 |
150 |
400 |
1400 |
850 |
1100 |
120 |
50 |
50 |
28 |
28 |
FLD-220 |
700 |
1500 |
1900 |
150 |
460 |
1900 |
950 |
1300 |
250 |
50 |
50 |
28 |
28 |
FHD-220 |
700 |
1200 |
1700 |
150 |
460 |
1700 |
950 |
1300 |
250 |
50 |
50 |
28 |
28 |
FHD-300 |
900 |
1500 |
2000 |
150 |
660 |
2000 |
1000 |
1580 |
400 |
50 |
50 |
28 |
28 |
Remarks:
Specifications and designs are subject to change.
Without notice due to future modifications.
The machines shown in the photograph are not of the standard model.
The specifications may be changed for different service conditions.
Characteristic
Using 4 or 6 round pillars structure can decrease dynamic friction. therefore, in the case of continuous operation for a long time, the heat generation is very tiny to ensure the accuracy of the press and to prevent damage to the mold, extending the life of the mold.
By using the versatile bilingual touch screen, displaying operating procedures, punch angle, speed, and fault information, complete functions, simple operation, safe and efficient.
The machine Body is made of excellent tensile strength cast iron alloy with excellent shock-absorbing properties, which passed the testing of the national quality inspection department, even at high-speed stamping and high-speed feeding, the body is still calm with small vibration, can ensure the long-term accuracy of the machine.
There are both manual and electric ways to adjust the mold height, so it’s easy to operate.
The unique homeostasis design, which can balance the crankshaft vibration during high-speed operation of the slider produced, control the lower dead point accuracy.
All bearings are imported from Japan with good properties, precision, and long life, effective in ensuring good performance of the machine.
There is a punching testing workshop in our factory, all punching machines will be well detected before sending out, to ensure it is of high quality, high accuracy, and high stability, so it rarely fails after sending out.